 |
|
Preliminary announcement.
Direct from site clearance of substantial range of electroplating and ancillary equipment from large sub-contract organisation, Stuttgart, Germany
Equipment has been used for plating on plastics and metals in the automotive, sanitary ware, electronics and household appliance markets.
Former clients include: Audi, BMW, Bosch-Siemens, DaimlerChrysler, Geberit, Geze, GROHE, Mitsubishi, Neff, Schwab, SEAT and Volkswagen.
Current plant information below, much more detail to follow.
|
|
 |
55 station copper/nickel/chrome line for plating on ABS plastics
A high quality plant with Siemens controls. YOM 2013. 6 transporters, 9 x Ni plating stations, 2 x chrome plating stations, 5 x acid copper, rinse tanks and end of line drying. Tank sizes circa 1500 x 450 x 1200 mm deep.
More information... |
|
 |
40 station copper/nickel/chrome line for plating on metals.
4 transporters, 7 x Ni plating stations with bright, matt, and pearlescent finishes, black and bright chrome plating stations, acid copper with on-line ultrasonic cleaning, pre-treatments and rinse tanks. Tank sizes circa 1500 x 450 x 1200 mm deep.
More information... |
|
 |
200m3/day waste water effluent control plant
Demin water plant with 3 x pair anion/cation resin exchange vessels and mixed bed filter; Wiemar GmbH PLC control and monitoring system; 4,000 to 24,000 litres polypropylene storage vessels; dosing and fluid transfer pumps
More information... |
|
 |
10m3 fully automated dewatering sludge filter press installation
Netzsch 31 plate 800mm3 filter press with fully automated pumping, opening, washdown and 10,000 kg skip presenter delivering approx. 800 litres dry cake per cycle.
More information... |
|
|
