Clearance Auction
Riley Surface World is clearing the warehouse for brand new stock.
This is your last chance to purchase these items via our auction partners Peaker Pattinson
Register on their we site to start bidding today!
Dreher CraneCare Lift N Load Hoist
A lift and load device built by CraneCare to work in conjunction the the Dreher VT 5 range of machines (Our stock number VT1037A & B) for replenishing the media and parts into the processing bowls.
- Lot ID
- VT1047B
- Category
- Barreling & Rumbling Machinery
- Model
- Dreher Shot Transport
- Capacity
- 100kg lift capacity
- Type
- Loading hopper with vertical lift system
- Other Info
- Dreher VTS Suport Equipment
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Dreher CraneCare Lift N Load Hoist
A lift and load device built by CraneCare to work in conjunction the the Dreher VT 5 range of machines (Our stock number VT1037 A & B) for replenishing the media and parts into the processing bowls.
- Lot ID
- VT1047A
- Category
- Barreling & Rumbling Machinery
- Model
- Dreher Media transport system
- Capacity
- 100kg
- Type
- Loading hopper with vertical lift system
- Other Info
- Dreher VTS Suport Equipment
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Walther Trowal Turbotron
Walther Trowal Turbotron centrifugal disc finishing machines offer up to 10 times higher performance.
Turbotron machines are mainly used for the removal of strong burrs and for the edge radiussing of small and medium size bulk parts.
- Lot ID
- VB2209
- Category
- Vibratory Deburring & Polishing Machines
- Model
- Walther Trowal TT15
- Capacity
- 25 Litres
- Type
- Disc Finisher
- Other Info
- 1.5kW
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Equipment Support Company Large Target Conformal Coatings Sputterer
Equipment Support Company (Stainless Fabrication) Sputterer. Sputtering is the ideal method to deposit stoichiometric conformal coatings. Widely used in the semiconductor and electronics industry. These systems are ideal for coating a wide range of substrates including silicon, glass and plastics.
- Lot ID
- TZ275J
- Category
- Associated Process Plant & Equipment
- Model
- Equipment Support Company ELAS RF/DC
- Work Envelope (WxDxH mm) [?]
- 1800 x 700 x 177
- Process Stages
- Multiple passes in single process step
- Other Info
- Target 450 x 450mm. Used for R&D Only
- Condition
- From a working environment, Excellent Condition
- Location
- Rolls Royce stores Unit 6
- Part of an Auction
- Clearance Auction
Oxford Applied Research Solar Vacuum Laminator
Oxford Applied Research Solar Vacuum Laminator
- Lot ID
- TZ271
- Category
- Miscellaneous
- Model
- Oxford Applied Research Laminate All vl 806
- Capacity
- 1200 x 600 tbc
- Process Application
- Laminate and Cure
- Other Info
- Mobile heavy duty build qualtiy
- Condition
- From a working environment
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
C and W Specialist Equipment Salt Spray Cabinet ST450
The C & W ST 450 accelerated corrosion & environmental test chamber automatically monitors and adjusts the cyclic test giving consistent and reliable results. Includes Spares worth £200
- Lot ID
- TB305
- Category
- Powder coating, wet paint plant & equipment
- Model
- C and W Specialist Equipment ST450
- Work Envelope (WxDxH mm) [?]
- 825 x 650 x 500mm
- Process Stages
- Multi climatic testing
- Other Info
- UK's Premier Manufacturer
- Condition
- Seen powered at RSW
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Burrows & Smith D-Burr Gear Deburring Machine
The D-Burr is an efficient machine designed to remove burrs from spur, bevel and helical gear teeth up to a 25° helix angle and sprockets and other components which have equi-spaced teeth around the periphery
- Lot ID
- PU1057C
- Category
- Through feed flat bed Linishing & Brushing Machinery
- Model
- D-Burr
- Other Info
- Gear De-burring system
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Burrows & Smith D-Burr Gear Deburring Machine
The D-Burr is an efficient machine designed to remove burrs from spur, bevel and helical gear teeth up to a 25° helix angle and sprockets and other components which have equi-spaced teeth around the periphery
- Lot ID
- PU1057B
- Category
- Through feed flat bed Linishing & Brushing Machinery
- Model
- D-Burr
- Other Info
- Gear De-burring system
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Burrows & Smith D-Burr Gear Deburring Machine
The D-Burr is an efficient machine designed to remove burrs from spur, bevel and helical gear teeth up to a 25° helix angle and sprockets and other components which have equi-spaced teeth around the periphery
- Lot ID
- PU1057
- Category
- Through feed flat bed Linishing & Brushing Machinery
- Model
- D-Burr
- Other Info
- Gear De-burring system
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Ellis Brothers Polishing / Linishing Machine
This Used (second hand) Ellis Brothers machine is an industrialy rated combined backstand linisher / belt sander and polisher
- Lot ID
- PQ945
- Category
- Manual Polishing Lathes & Machinery
- Model
- Ellis Brothers
- Hp/Kw
- 3ph 50 Hz
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
W Canning Canning Model 2396 Centreless Polisher
A second hand automatic Machine for the Polishing and finishing of cylindrical parts. Centreless Polishers are designed for use on tubes, round bar, rolls, cylinders, pins, shafts,hollow sections, guide rails, extruder screws, billets, etc.
- Lot ID
- PP751
- Category
- Centreless Polishing & Belt Linishing Machinery
- Model
- W Canning 2396
- R.P.M.
- 1500
- Other Info
- Capacity up to 28mm
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Seeco Wet Belt Linisher
Seeco Wet Belt Linisher. 75 mm wide belt
- Lot ID
- PL586
- Category
- Manual Linishing & Belt Grinding Machinery
- Model
- Seeco Seeco
- R.P.M.
- 1500
- Other Info
- Pedestal mounted WET belt option.
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
W Canning Centreless Polishing Machine
W Caning Centreless Polishing Machine. Centreless Polishers are designed for use on tubes, round bar, rolls, cylinders, pins, shafts,hollow sections, guide rails, extruder screws, billets, etc.
- Lot ID
- PC234
- Category
- Centreless Polishing & Belt Linishing Machinery
- Model
- W Canning 2396
- Other Info
- Capacity upto 28mm Ø
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Centrotherm Centronic Diffusion Tube Furnace
Centrotherm Centronic Diffusion Tube Furnace. The furnace was used in the manufacture of the BP Solar Saturn Cell (Laser Grooved Buried Contact) this was used in the manufacture of solar concentrator systems.
- Lot ID
- OZ1259J
- Category
- Industrial Furnaces
- Model
- Centrotherm E1550 HT
- Internal Size (WxDxH mm) [?]
- 4 x Tubes each - Length 1650mm x Ø285mm
- Max Temp
- 1200°C
- Condition
- Seen working by RSW, Good Condition
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Centrotherm Heating Cassette
Centrotherm Heating Cassette
- Lot ID
- OZ1259-9
- Category
- Associated Heat Treatment Equipment
- Model
- Centrotherm
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Thermotron Environmental Chamber
A used Thermotron Temperature and Humidity model SM-16 Test Chamber.
When extreme temperature testing is required, the SM-16 offers ultimate flexibility for your materials testing needs.
- Lot ID
- OY2019
- Category
- Associated Heat Treatment Equipment
- Model
- Thermotron SM 16 CE
- Internal Size (WxDxH mm) [?]
- 760 x 760 x 760
- Other Info
- For Spares & Repairs
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Thermotron Environmental Chamber
A used Thermotron Temperature and Humidity model SM-16 Test Chamber.
When extreme temperature testing is required, the SM-16 offers ultimate flexibility for your materials testing needs.
- Lot ID
- OY2018
- Category
- Laboratory & Bench Top Ovens
- Model
- Thermotron SM 16 C
- Internal Size (WxDxH mm) [?]
- 760 x 760 x 760
- Max Temp
- -70°C to +180°C
- Other Info
- Full Service History
- Condition
- From a working environment, Good Condition
- Location
- Rolls Royce stores Unit 6
- Part of an Auction
- Clearance Auction
Unitemp HCL350 Direct Injection COČ Chamber
Unitemps HCL 350 Temperature Test chamber that utilises CO2 or LN 2 as a rapid response cooling medium.
- Lot ID
- OR1160
- Category
- Laboratory & Bench Top Ovens
- Model
- Unitemp HCL 350
- Internal Size (WxDxH mm) [?]
- 1000 x 700 x 600mm
- Max Temp
- -68°C and +150°C
- Other Info
- CO2 Environmental test chamber
- Location
- Rolls Royce stores Unit 6
- Part of an Auction
- Clearance Auction
Montford Bench Top Test Chamber
The Montford Mini-Mech Bench Top Chamber is a portable compact model which is easy to transport, locate and install, making it Ideal for environmental testing of smaller products and components for extreme heat, and cold conditions.
- Lot ID
- OP917
- Category
- Laboratory & Bench Top Ovens
- Model
- Montford Mini P LGA
- Internal Size (WxDxH mm) [?]
- 230 x 200 x 250 mm
- Max Temp
- approx - 40°c to + 100°c
- Other Info
- Heat cold extreme testing instrument
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Lee Laser Innovative Laser Solutions Dual Laser with Robot Wafer Loader
Lee laser Series 800 Nd: Yag Laser 825 TQ/CE Innovative Laser Solution.
- Lot ID
- MZ692J
- Category
- Miscellaneous
- Model
- Lee Laser 825 TQ/CE Yag Laser
- Capacity
- XY 600mm
- Process Application
- Innovative Laser Solution
- Other Info
- 1064 mm Wavelength
- Condition
- From a working environment, Good Condition
- Location
- Rolls Royce stores Unit 6
- Part of an Auction
- Clearance Auction
Lee Laser 700 Series Single Laser
Lee Laser 700 Series Single Laser with 1064 Wavelength.
- Lot ID
- MZ691J
- Category
- Miscellaneous
- Model
- Lee Laser 712TQ
- Capacity
- XY 600mm
- Process Application
- Scribing 6" Wafers
- Other Info
- Power 12 Watts
- Condition
- From a working environment, Good Condition
- Location
- Rolls Royce stores Unit 6
- Part of an Auction
- Clearance Auction
Innolas Photovoltaic High Powered Speed Laser Edge Isolation
Innolas ILS 700P Photovoltaic Laser Drill with Loader and unloader
- Lot ID
- MZ690J
- Category
- Associated Process Plant & Equipment
- Model
- Innolas ILS 700P
- Work Envelope (WxDxH mm) [?]
- Wafers upto 200mm
- Process Stages
- Multiple wafer process modifications
- Other Info
- Includes additional complete laser head
- Condition
- From a working environment, Excellent Condition
- Location
- Rolls Royce stores Unit 6
- Part of an Auction
- Clearance Auction
ATS Test System Solar Cell Tester
ATS Test System Solar Cell Tester. Equipment used to analyse the characteristics of a finished cell, like the efficiency of light conversion to give volts and amperage and perhaps at different wavelengths. After cells are manufactured, they are sorted and priced according to their power output.
- Lot ID
- MZ689J
- Category
- Miscellaneous
- Model
- ATS Laboratory Solar Tester
- Capacity
- Cells 150/200mm
- Process Application
- Test Solar Cells
- Other Info
- Clean room quality full document support
- Condition
- From a working environment, Good Condition
- Location
- Rolls Royce stores Unit 6
- Part of an Auction
- Clearance Auction
Worthington Simpson Pumps and Control Panel
Control panel and two Worthington Simpson close coupled end suction pump types WB, WJ & WJE form part of Flowserve’s D Line range of pumps.
- Lot ID
- MY626
- Category
- Miscellaneous
- Model
- 40 WJE 200
- Capacity
- 40M3 Hr : head 200KPa
- Process Application
- Fluid Movement
- Other Info
- Max suck pressure 2.75 Bar
- Condition
- Good Condition
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Netzsch Nemo BY Progressing Cavity Pump
NEMO Progressing Cavity Pumps have a very broad application range and are used in all branches of industry for the continuous, pressure-stable, gentle and low-pulsation conveyance of almost any substance.
- Lot ID
- MX599
- Category
- Associated Process Plant & Equipment
- Model
- Netzsch NM045BY02S12B
- Process Stages
- 1
- Other Info
- Unused spare pump
- Condition
- From a working environment, Current Model
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Fume Extractor
Fumex FF50-230 Extractor with Cartridge filter
- Lot ID
- MC871
- Category
- Fume Extraction Fans & Scrubbers
- Model
- FF50 - 230
- Approx Duty CFM / M³/Hr
- 206//0-350
- Other Info
- variable speed fan
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Small Mounted Granite Table
Small mounted Granite Table. This handy flat surface table has many uses. Made entirely of granite it will always remain flat, neither changes in ambient temperature nor humidity will affect its accuracy, scratches and damages do not produce burrs, so again, no influence on measurement accuracy. Table working Area 460 x 460 x 80mm
- Lot ID
- MC866
- Category
- Miscellaneous
- Capacity
- Work Area - 460 x 460 x 80mm
- Condition
- From a working environment, Good Condition
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Arboles U.K. Floor Mounted Emergency Eyewash & Shower
Brand New in the box. Floor Mounted Emergency Eyewash & Shower with ABS Shower Head & Bowl
- Lot ID
- MC865
- Category
- Miscellaneous
- Model
- Arboles U.K. 4220
- Process Application
- Emergency Shower / wash
- Other Info
- As new
- Condition
- Brand New, Unused
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Semco Milling Machine with Power Traverse and Twin Axis Digital Readout
Tool room vertical milling machine with fitted power x axis table traverse and a digital twin axis readout (x and y)
- Lot ID
- MC864
- Category
- Miscellaneous
- Model
- Semco LC 185 VS
- Process Application
- Vertical Milling Operations
- Other Info
- Anilam Wiz 211 Twin Axis Digital Display
- Condition
- From a working environment, Good Condition
- Location
- Rolls Royce stores Unit 6
- Part of an Auction
- Clearance Auction
Granite Surface Table and Stand
This handy flat surface table has many uses. Made entirely of granite it will always remain flat, neither changes in ambient temperature nor humidity will affect its accuracy, scratches and damages do not produce burrs, so again, no influence on measurement accuracy.
- Lot ID
- MC863
- Category
- Miscellaneous
- Model
- Granite Marking Out Table on Stand
- Capacity
- Working Area - 1400 x 800
- Process Application
- Marking Out
- Other Info
- Granite is always flat, no raised burrs
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Carter Environmental CF Dry Dust Collector
The Carter Environmental CF dry Dust Filter offers complete filtration solutions with various fabric and coating options to suit every application and duty that can be thrown at it.
- Lot ID
- EU1339
- Category
- Dry Dust Filters
- Model
- Carter Environmental CF Dry Dust Filter
- Approx Duty CFM / M³/Hr
- 4000 - 6000 // 6800 - 10,000
- Filter Area ft² / m²
- 1330 // 130
- Other Info
- Adaptable filters & fan options
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
50M Dust Extractor
The M 50 E is a robust simple mechanically cleaned baghouse dust collector suitable for non-continuous duty for industrial, commercial and educational locations.
- Lot ID
- EC2054
- Category
- Dry Dust Filters
- Model
- M50E/4.0Kw
- Approx Duty CFM / M³/Hr
- 2500 / 4250
- Filter Area ft² / m²
- 500 // 50
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Kerry ( Guyson International ) Kerry Ultrasonic Compact 300A/4
This second-hand Guyson International Kerry 300A/4 multi stage Ultrasonics cleaning system offers a rapid and highly effective method of precision cleaning components to a very high standard.
- Lot ID
- DA1397
- Category
- Aqueous Ultrasonic Cleaning & Washing
- Model
- Kerry ( Guyson International ) compact 300A/4
- Work Envelope (WxDxH mm) [?]
- 250 x 350 x 400
- Process Stages
- 4 Stage, 3 wet + hot air dry
- Other Info
- max temp 70°C wash and 100°C Dry
- Condition
- From a working environment
- Location
- Rolls Royce stores Unit 6
- Part of an Auction
- Clearance Auction
HITvalve Auma Acutator and Valve Combination System
'Hit Valve' ball valves from the Italian manufacturers, coupled with the 'Auma' variable operating time actuators. This set up can be used to control the flow of gases or liquids through any arrangement of pipework.
- Lot ID
- BID 626
- Category
- Miscellaneous
- Model
- HITvalve NPS 4
- Process Application
- Flow Control
- Condition
- From a working environment
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
HITvalve Auma Acutator and Valve Combination System
'Hit Valve' ball valves from the Italian manufacturers, coupled with the 'Auma' variable operating time actuators. This set up can be used to control the flow of gases or liquids through any arrangement of pipework.
- Lot ID
- BID 625
- Category
- Miscellaneous
- Model
- HITvalve GS100.3-F16-N-P
- Process Application
- Flow Control
- Condition
- From a working environment
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
ABB Motor Gear Box - from Hunziker
Motor Gear Box - from Hunziker
- Lot ID
- BID 624
- Category
- Miscellaneous
- Model
- ABB
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Two Centrifugal Pumps
Two Centrifugal Pumps. Abrasive developments wet blasting machine pumps. Two similar cast iron pumps designed to be sump mounted. Both motors are 3 phase 440Volt
- Lot ID
- BID 622
- Category
- Miscellaneous
- Model
- 5.5kW and 11kW
- Process Application
- Wet Blasting
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Collection of Pumps and Motors
Collection of pumps and Motors. 5 pumps consist of 4 Lowara style stainless steel body pumps and the fifth one is a plastic pump. The two motors consist of a 7.5kW 3 phase unit with a double vee belt pulley mounted to the shaft, the second motor has no pulley but is similar in size
- Lot ID
- BID 621
- Category
- Miscellaneous
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Collection of Pumps
Collection of 5 Pumps. 4 are Lowara stainless steel body pumps and the 5th is a 5.5kW Pedrollo cast iron body pump which can pump up to 500 L/Min.
- Lot ID
- BID 620
- Category
- Miscellaneous
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Heraeus CentroTherm Diffusion Furnace Glass Tube Liners Qty 6
Diffusion Furnace Glass Tube Liners Qty 6
- Lot ID
- BID 615
- Category
- Miscellaneous
- Model
- Heraeus
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
System 3R Tooling (1 Box)
Box of System 3R Tooling
- Lot ID
- BID 606
- Category
- Miscellaneous
- Model
- 3R
- Process Application
- CNC Machining
- Other Info
- Ideal in a CNC machine Shop
- Condition
- Good Condition
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Turning Tools ( 1 Box)
Box of approximately 50 Turning Tools mostly 25 x 25 shank. These Insert holders are for use on conventional or CNC engineering machines, a selection covering turning, grooving and parting off.
- Lot ID
- BID 605
- Category
- Miscellaneous
- Model
- Various
- Capacity
- 25 x 25mm Shank
- Process Application
- Turning, Grooving and Parting off.
- Other Info
- Ideally Suit a CNC or Tool Room Shop
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Various Inserts for CNC and Tool Room Tooling (1 Box)
Box of various inserts for machine tooling. A wide variety of machine tool inserts mostly unused sill in the original containers. Turning, milling, threading and parting off / grooving. Too numerous to list individually.
- Lot ID
- BID 604
- Category
- Miscellaneous
- Process Application
- Cutting Tools
- Other Info
- A Wide Variety of Machine Tool Inserts
- Condition
- Unused
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Various Clamps (1 Pallet, 6 Boxes)
Pallet of Various Clamps 6 Boxes. Can be used to fasten down components, vices or fixtures to machine beds such as milling machines or CNC machining centres.
- Lot ID
- BID 602
- Category
- Miscellaneous
- Model
- Various manufactuers
- Process Application
- Clamping and fixing
- Other Info
- Items from a Machining Shop or Tool Room
- Condition
- Good Condition
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
ISO40 Standard Fittings including C-Spanners
Pallet of ISO40 Standard Fittings including C-Spanners
- Lot ID
- BID 600
- Category
- Miscellaneous
- Condition
- From a working environment, Good Condition, Current Model
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Sterling Fluid Systems Multi Stage Pump
Sterling Fluid Systems Multi Stage Pump
- Lot ID
- BID 515
- Category
- Miscellaneous
- Model
- NLVA01610A
- Location
- Clearance Auction
- Part of an Auction
- Clearance Auction
Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.
Machines & equipment for sale
- Surface Treatment
- Cleaning & Degreasing
- Polishing & Belt Linishing
- Mass Finishing
- Ovens & Furnaces
- Process Cooling
- Shot Blasting
- Dust & Fume Extraction
- Air Compressors
- Rectifiers & Transformers
- Miscellaneous
- Latest Stock
- Special Offers
- Direct From Site Clearances
- Auctions
- Brand New Machines
- Available Immediately
- Sell Your Machine
Machine Alert
Get the latest machines emailed directly to you as they become available to buy online. Sign Up Now
