ERG Process Plant Ltd Ardrox Penetration Application Equipment and Spray Booth with Extraction
![ERG Process Plant Ltd Ardrox Penetration Application Equipment and Spray Booth with Extraction](/cdn-cgi/image/fit=pad,width=598,height=598/https://images.rileysurfaceworld.co.uk/live/machines2/2024/6/322091107202409524476414.jpg)
- Stock No
- GD876J
- Manufacturer
- ERG Process Plant Ltd
- Model
- Ardrox Penetrant Application / Spray Booth
- Serial
- 1069
- Condition
- From a working environment, Good Condition, Current Model
- Work Envelope (WxDxH mm) [?]
- 2000 x 2000 x 2050mm Approx.
- Process Stages
- Ardrox None Destructive Testing (NDT)
- Other Info
- Twin Penetrant Pressure Pot Controls
- Location
- Our Central Warehouse, Aldridge, UK
- External Dimensions (WxDxH mm) [?]
- 2900 x 2710 x 3000
- Delivery Your delivery options
Description
This penetrant application/drain/contact and combined wash station can be used for the application of fluorescent dye penetrant and the subsequent penetrant drain and contact time. When the penetrant contact time has expired, parts that have been processed using water washable penetrant are post washed in this booth. In the case of post emulsifiable penetrant, it will be the pre wash.
Features
- The booth comprises galvanised steel sheet panels with a galvanised grid floor over a stainless steel drain tray.
- The booth is 2900mm wide and 2710mm from front to back. The internal height is 2050mm from the grid floor to the underside of the ceiling.
- The rear wall of the booth comprises full width and height extraction slots, through which the fan will draw the airflow through the demisting filter media into the plenum chamber and a 625mm diameter axial fan mounted on the top of the booth.
- Two pairs of ceiling mounted strip lights with both white and UV-A tubes are provided inside the booth to enable checking for full penetrant coverage of the surfaces to be tested. Separate pull cord switches are provided for white and UV lights.
- The booth is equipped with two manual liquid penetrant application gun complete with, hoses, penetrant pressure pot and delivery system.
- The penetrant application gun is interlocked with the extraction system and will not operate unless the extraction system is running.
- A separate freestanding trolley mounted penetrant application system comprises a 19.5 litre capacity stainless steel penetrant pressure pot with flexible hose to hand held delivery gun.
- One manual air/water gun is supplied (Ardrox AE7 model) complete with hoses and isolation valves.
- The front of the booth is fitted with full width and height heavy duty blackout curtains mounted on high level slide rail.
- Pressure Gauges for Water, Air and blow off gun, plus temperature.
- Booth is split across the centre to allow larger slung items to pass in and out at each side whilst supported from above.
Spray Equipment
The air/water gun is supplied from a pressure control panel mounted on the side of the booth comprising:
- Air pressure gauge
- Air pressure regulator
- Calibration point for the air pressure gauge
- Water pressure gauge
- Calibration point for the water pressure gauge
- Water temperature gauge
- One manual air blow off gun is provided complete with hose and isolation valve
- Pneumatic timer
What Does Fluorescent Penetrant Testing Do for Surface Finishing?
For manufacturing components, especially those with critical functions, penetrant testing is the non-destructive testing (NDT) method that checks for surface flaws that could result in component instabilities if not found. Used for quality control, regulatory compliance, failure analysis and routine maintenance.
Fluorescent penetrant testing involves applying a fluorescent penetrant dye with a low surface tension, allowing it to infiltrate all the imperfections to the surface. That is then further developed and viewed inside a dark room/area with UV lighting to highlight the flaws to the inspector.
Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.
Machines & equipment for sale
- Surface Treatment
- Cleaning & Degreasing
- Polishing & Belt Linishing
- Mass Finishing
- Ovens & Furnaces
- Process Cooling
- Shot Blasting
- Dust & Fume Extraction
- Air Compressors
- Rectifiers & Transformers
- Miscellaneous
- Latest Stock
- Special Offers
- Direct From Site Clearances
- Auctions
- Brand New Machines
- Available Immediately
- Sell Your Machine
Machine Alert
Get the latest machines emailed directly to you as they become available to buy online. Sign Up Now