Associated Mass Finishing Equipment
Acton Vibrota type RB75 Parts Rumbler
A small single barrel rumbling machine for high quality, small component surface finishing. This small-scale, industrial barrel is designed to support media such as steel balls when surface finishing small components.
- Stock No
- VD349
- Category
- Associated Mass Finishing Equipment
- Model
- Acton Vibrota RB75
- Year of Manufacture
- Unknown
- Capacity
- 10 Litres
- Type
- Drum Tumbler
- Other Info
- 240 Volt
- Sold As Seen Price [?]
- £ Login or Register for price.
Skako FVE090 Feeder MCE9000 Weigh Checker Pay Loader
SKAKO COMESSA Ltd. VIBRATION - storage feeder weigh checker type FVE are suited especially for feeding bulk material and also to untangle interlocking products to realise an automatic and consistent product flow.
- Stock No
- MA766
- Category
- Associated Mass Finishing Equipment
- Model
- Skako FVE090 MCE 9000
- Year of Manufacture
- 1997
- Capacity
- 60kg load cells
- Type
- FVE090 - CCE - MCE 9000
- Other Info
- 90 litre volume with 60kg capacity
- Condition
- Excellent Condition, Seen powered at RSW
- Location
- Rolls Royce Stores Unit 6
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Walther Trowal DLT4 Continuous Rotary Drum High Component Volume Maize Dryer
This second hand Walther Trowal DLT4 parts dryer is for the drying of mass produced parts on a continuous basis. Ideally suited as a secondary process after mass parts finishing in vibratory and high energy systems.
- Stock No
- VA2185J
- Category
- Associated Mass Finishing Equipment
- Model
- Walther Trowal DLT-4
- Year of Manufacture
- 1992
- Capacity
- 1,000 (kg/h)
- Type
- Continuous parts dryer
- Other Info
- High throughput machine, 3.5 - 7RPM
- Condition
- From a working environment, Good Condition, Current Model
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler R150 TA Storage / Sorting Table
Rosler Storage / Sorting Table R150 TA
- Stock No
- VA2187J
- Category
- Associated Mass Finishing Equipment
- Model
- Rosler R150 TA
- Year of Manufacture
- 2004
- Capacity
- Ø1500mm
- Type
- Sorting and Storage Rotary Table
- Other Info
- 400V/50Hz
- Condition
- From a working environment, Good Condition, Current Model
- Sold As Seen Price [?]
- £ Login or Register for price.
Vibratory Loader with transfer
Vibratory Loader with transfer. Accepting work tipped from original equipment manufacturers bins. Abrasive resistant lined vibratory transfer chute including a separation screen for the removal of fluids or debris from the path of the transfer.
- Stock No
- VZ2161
- Category
- Associated Mass Finishing Equipment
- Model
- Load multiple processes
- Capacity
- 500kg
- Type
- Vibratory feed and transfer.
- Other Info
- Compact, Heavy duty
- Condition
- From a working environment, Seen working by RSW, Good Condition
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Walther Trowal Automatic Peeling Centrifugal Waste Water Processing Plant with Integral Solid Dewatering Facility
After vibratory finishing the effluent (dirty process water) contains abrasive and metal fines, frequently also oil and metals. For this reason, the effluent must be cleaned before going to drain or being recycled back to the finishing process
- Stock No
- VZ1241
- Category
- Associated Mass Finishing Equipment
- Model
- Walther Trowal ZA06
- Year of Manufacture
- 2006
- Capacity
- 2000 litre/hour
- Type
- Centrifugal sludge dewatering separator
- Other Info
- Comprehensive waste water treatment
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler R290/650 FB/T Belt Conveyor
Rosler R290/650 FB/T Belt Conveyor
- Stock No
- VW1152K
- Category
- Associated Mass Finishing Equipment
- Model
- Rosler R290/650 FB/T
- Year of Manufacture
- 2004
- Type
- Flightless belt
- Other Info
- 400V/50Hz
- Condition
- From a working environment, Good Condition, Current Model
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler Delicate Parts Transfer & Seperator
Rosler Delicate Parts Transfer & Separator
- Stock No
- VW1152D
- Category
- Associated Mass Finishing Equipment
- Model
- Rosler Type JD 50
- Year of Manufacture
- 2004
- Type
- Linear vibratory transfer screen
- Other Info
- Width of screen
- Condition
- From a working environment, Excellent Condition, Current Model
- Location
- Rolls Royce stores Unit 6
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Dr Ing Goessling Z1 Continuous Centrifuge Unit
The Goessling Z1 de-oiling centrifuges/washers were developed for the cleaning of massed produced formed parts. This is accomplished through smoothly accelerated centrifugal force with stop and start cycles, which aids the centrifugal process to produce a clean, de-oiled part.
- Stock No
- VX1174
- Category
- Associated Mass Finishing Equipment
- Model
- Dr Ing Goessling Z1
- Capacity
- 8 kg
- Type
- Heated centrifugal dryer / de-oiler
- Other Info
- Automatic continuous feed.
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Pumping Station
The lifting station is a low height robust storage tank made from polyethylene with an angled bottom. The tank is designed to offer gravity feed with pumped return.
- Stock No
- MW575
- Category
- Associated Mass Finishing Equipment
- Model
- Pumping station
- Type
- Buffer tank with stem pump
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler 'Z2000 ASS-2-Turbo' Centrifuge
With the Rosler Z2000 Turbo Centrifuge the recycling of the process water from the finishing process not only reduces the consumption of water (up to 98 %), but it also reduces the usage of compound (up to 90 %) and the cost of waste disposal.
- Stock No
- VW1156
- Category
- Associated Mass Finishing Equipment
- Model
- Rosler Z2000 ASS-2 ASS-2-TURBO
- Year of Manufacture
- 2002
- Capacity
- 2000 litre/hour
- Type
- 500 mm diameter Centrifuge
- Other Info
- 3 phase 400vac/11 kW
- Location
- Rolls Royce Stores Unit 6
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler Induction Transfer Chute
Rosler medium duty Vibrating Transfer Conveyor which is ideal for moving a wide range of free-flowing materials in food and chemical processing.
- Stock No
- VS991
- Category
- Associated Mass Finishing Equipment
- Model
- Rosler Vibrating Transfer Conveyor
- Year of Manufacture
- 2003
- Type
- Inductive vibratory transfer
- Refurbished Price [?]
- £ Login or Register for price.
Acton Waste Water Sludge Separation / Treatment Facility with Centrifuge.
Designed for vibratory surface finishing machines, this settlement tank with centrifuge recycles the process water through the system filtering out the sediment and impurities, returning the clean water to the process for re-use. Sediment is collected in the centrifuge inner chamber lining which is swapped for cleaning and reduced downtime.
- Stock No
- VB2204
- Category
- Vibratory Deburring & Polishing Machines
- Model
- Acton A 800 Batch Centrifuge
- Year of Manufacture
- 2016
- Capacity
- Tank ~ 280L : Centrifuge ~ 100L
- Type
- High Speed Sludge Centrifugal Separator.
- Other Info
- 280L Stainless Steel Holding Mixing Tank
- Condition
- Good Condition, Seen powered at RSW
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Walther Trowal Magnetic Conveyor / Seperator
If your work pieces and abrasive media are roughly similar in size, then the external magnetic separation units from Trowal could be the ideal solution for precisely separating parts. This saves both time and money over manually screening your parts and media once it has left the system.
- Stock No
- MB770
- Category
- Vibratory Deburring & Polishing Machines
- Model
- Walther Trowal Electro - Magnetic separator MS225 BL3400
- Year of Manufacture
- 1995
- Capacity
- Track 200mm wide
- Type
- Electro-magnetic mag and de-mag
- Other Info
- Height adjustable between 1300 and 1500m
- Condition
- Seen working by RSW, Good Condition
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Walther Trowal DLT4 Continuous Rotary Drum High Component Volume Maize Dryer
This second hand Walther Trowal DLT4 parts dryer is for the drying of mass produced parts on a continuous basis. Ideally suited as a secondary process after mass parts finishing in vibratory and high energy systems.
- Stock No
- VA2186J
- Category
- Vibratory Deburring & Polishing Machines
- Model
- Walther Trowal DLT.4SM
- Year of Manufacture
- 1987
- Capacity
- 1,000 (kg/h)
- Type
- Continuous parts dryer
- Other Info
- High throughput machine
- Condition
- From a working environment, Excellent Condition, Current Model
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Rosler Flighted Transfer Conveyor
Rosler flighted belt conveyors are an ideal way of conveying products at angles greater than 30 degrees, which could cause the product to slide or roll back down the conveyor. Pneumatic Shuttle in/out of load/unload position.
- Stock No
- MS349J
- Category
- Associated Process Plant & Equipment
- Model
- Rosler R360/1500 FB/T-So
- Year of Manufacture
- 1996
- Work Envelope (WxDxH mm) [?]
- 375mm width belt
- Process Stages
- Feeding and Unloading
- Other Info
- Pneumatic Shuttle in/out of load/unload
- Condition
- Excellent Condition, Current Model
- Sold As Seen Price [?]
- £ Login or Register for price.
Surface Finishing Equipment Ltd. Waste Chemical Pumping Station
Waste chemical pumping station comprising of a very high quality polypropylene chemical pumping station. With a 200 litre capacity, this pumping station is constructed from black 8mm polypropylene and is supplied fully welded, with a Serfilco polypropylene double diaphragm pump.
- Stock No
- TA286
- Category
- Associated Process Plant & Equipment
- Model
- Surface Finishing Equipment Ltd. Waste Chemical Pumping Station
- Year of Manufacture
- 2015
- Work Envelope (WxDxH mm) [?]
- 200 Litres
- Process Stages
- Collection, Pump and Transfer
- Other Info
- Polypropylene Double Diaphragm Pump.
- Condition
- From a working environment, Good Condition
- Sold As Seen Price [?]
- £ Login or Register for price.
Canning Open Ended Drying / Barreling Machine
Drying out barrels are used for the speedy drying of small articles after electro-deposition, bright dipping or wet barrel burnishing. For maximum efficiency it is recommended that Grit-o-Cobs be used with these barrels.
- Stock No
- VZ1239
- Category
- Barreling & Rumbling Machinery
- Model
- Canning Gas fired sawdust drying barrel
- Type
- Manual
- Other Info
- gas fired
- Sold As Seen Price [?]
- £ Login or Register for price.
Amsonic PLC Controlled, 5 Stage Semi-Auto Aqueous Cleaning Line
5 Stage Amsonic Cleaning Line, comprising of two heated wash / Immersion tanks, plus three rinse tanks to complete the process. Light Guards and operator platform for safe and easy working, 8 baskets for reducing loading and unloading downtime.
- Stock No
- DZ1344J
- Category
- Aqueous Ultrasonic Cleaning & Washing
- Model
- Amsonic 5 Tank, Rotational Basket, Wash / Rinse, Line.
- Year of Manufacture
- Recon 2017
- Work Envelope (WxDxH mm) [?]
- 650 x460 x 730
- Process Stages
- 5 Stages plus load / unload.
- Other Info
- 8 x Hexagonal work baskets 290 AF x 535
- Condition
- From a working environment, Excellent Condition
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Mobile Belt Transfer Loader
An innovative mobile belt fed product transfer conveyor, with adjustable height and multi access point storage hopper
- Stock No
- VY1231
- Category
- Miscellaneous
- Model
- Mobile Process Plant Auto Feeder
- Capacity
- Variable loads / height
- Process Application
- product feed conveyor
- Other Info
- Feed conveyor belt discharg 130 x 1200
- Condition
- From a working environment, Seen working by RSW, Excellent Condition, Seen powered at RSW
- Refurbished Price [?]
- £ Login or Register for price.
- Sold As Seen Price [?]
- £ Login or Register for price.
Master Fluid Solutions Xybex Coolant Cleaner
XYBEX® Coolant Recycling Systems represent the state-of-the-art in coolant recycling and benefit directly from Master Fluid Solutions`s more than twenty years experience in coolant recycling
- Stock No
- MY623
- Category
- Miscellaneous
- Model
- Master Fluid Solutions System 1000
- Capacity
- 1720 x 1270 x 660
- Process Application
- 2
- Other Info
- bottom tank 2400 x 1280 x 600 t
- Condition
- From a working environment, Good Condition, Current Model
- Sold As Seen Price [?]
- £ Login or Register for price.
Photographs taken prior refurbishment. Our refurbishment service is not available on all machines.
Machines & equipment for sale
- Surface Treatment
- Cleaning & Degreasing
- Polishing & Belt Linishing
- Mass Finishing
- Ovens & Furnaces
- Process Cooling
- Shot Blasting
- Dust & Fume Extraction
- Air Compressors
- Rectifiers & Transformers
- Miscellaneous
- Latest Stock
- Special Offers
- Direct From Site Clearances
- Auctions
- Brand New Machines
- Available Immediately
- Sell Your Machine
Machine Alert
Get the latest machines emailed directly to you as they become available to buy online. Sign Up Now
